Stuck with Netgear Router Orange or Amber Light Issue?

Is your Netgear router blinking orange or amber in color? Yes? Worry not. We can assist. In this article, we have shed light on the topmost troubleshooting tips that can be read and implemented by you to fix the issue at hand. Once you have resolved the issue at hand, you can easily access routerlogin.net and change the settings of your wireless device.

Prior to reading more, know one thing, panicking will not take you anywhere. This means that while reading the solutions given below, if you fail to understand any of them, re-read them and then try to resolve the same issue. Reminding yourself that you have got this covered is very important when it comes to resolving technical issues.

How to Fix Netgear Router Orange Light Issue?

1. Reboot the Netgear WiFi Router

Technical glitches are those guests that come to your house uninvited. If we talk about it in technical terms, what we are trying to say is that technical glitches invade your device without asking for your consent. They could software or hardware-related. To get rid of them, one simple thing needs to be done from your end, i.e. rebooting the device.

Rebooting the Netgear router is the easiest way one can fix the Netgear router blinking orange or amber issue. In order to give your networking device a much need start, it is recommended that you play with its power button a little. All you have got to do is, press it and turn the device OFF and ON. Now, check the status of the LED light.

2. Switch the Connection Source

Given this troubleshooting technique has caught your attention, we are assuming that the Netgear router blinking orange or amber issue is still troubling you. This could be because the source of connection that you have used is a wireless one which by the way is not the most reliable choice of sources.

To correct your mistake, you ought to take our advice and connect the networking devices with the aid of an Ethernet cable. Connect one end of the wire to the laptop and another to the router. Ensure that the connection which is being established is not loose. Now, check again if the Netgear router blinking orange or amber issue has been fixed.

3. Update the Netgear Router Firmware

In case you still cannot make amends with the Netgear router blinking orange or amber issue, then it could be because the software or in technical terms, the firmware of your Netgear wireless router is not updated. Either you forgot to update it or successfully ignored the notification that reminded you to do so.

To make the networking device get back on track, you ought to update the router. Now the question of concern is that if you cannot access routerlogin.net, then how will you be able to update the networking device? Well, in that case, you ought to make your client device access the hotspot and read the instructions given in the manual.

4. Reset the Netgear Wireless Router

Even after all the efforts which you have made, are you still not able to resolve the Netgear router blinking orange or amber issue? Well, your last resort could be resetting the Netgear wireless router. The same can be done if you access the reset button located inside the reset hole and press it with a sharp object.

A few examples of sharp objects could be an oil pin. You need to hold the button for about 30 seconds to 1 minute. As soon as your device resets, reconfigure it by doing Netgear Genie login. Want to learn more about the process? We will suggest you the same thing that we did in the last section, i.e. refer to the user manual.

In Conclusion

With the last troubleshooting solution, we are ending the guide written on how to resolve the Netgear router blinking orange or amber issue. We are anticipating that you will be able to change the status of your networking device from orange or amber to green. Apart from the solutions given above, in case you figured out some other solution through which the same issue can be ended, do share.