Netgear Extender Not Connecting to Internet Issue [Resolved]

The Netgear extender not connecting to internet issue has snatched the living daylights out of people who are in dire need of accessing a seamless internet connection on their client devices. Given, that this article has caught your attention and now you are reading it, it can only mean one thing, i.e. you are struggling to connect your Netgear extender to the internet while trying to set up the device via mywifiext, the default web address.

To help you to put an end to this issue, we have penned down this article. Here, we have discussed not just one, but various solutions that can be used by you in the process required to fix the Netgear extender not joining the internet issue. Keep reading.

How to Make Netgear WiFi Extender Join the Internet?

1. Change the Connection Source

The very first attempt that you can make to resolve the Netgear extender not joining the internet issue is to change the source of connection that you are using at the moment.
By this, we mean, that if you are using a wireless medium, then change it to using an Ethernet cable. The reason being, wired connection is much more reliable as compared to a wireless connection. After changing the source of connection, check in case you are able to resolve the Netgear extender not joining the internet issue. By the way, this tip can implemented regardless of you trying to perform Netgear AC1750 setup.

2. Restart the Wireless Extender

Another attempt that can be made from your end to resolve the Netgear extender not joining the internet issue is to restart or power cycle the wireless range extender.
The same can be done if you locate the power button on the extender, press it to turn off the device, unplug the extender from the socket, count from one to ten, plug the extender back into the wall socket, press the power button, and wait for the power light to become solid green. It is important for the light to become stable as it serves as a sign that your networking device is getting an adequate and uninterrupted power supply.

3. Reboot the Entire Network

In case rebooting the Netgear wireless range extender does not bear fruit for you, then you may reboot the entire network, i.e. the router, modem, and even the client device.
For your information, the process to reboot the network will remain the same. The only difference here is that before unplugging the devices, you ought to disconnect them and make them connection-free in case they are interconnected. As soon as you have rebooted your networking device, it is recommended that you try to make your Netgear wireless range extender join the internet or in other words, the host router.

4. Bring the WiFi Devices Closer

Given the Netgear extender not joining the internet issue is still troubling you; you ought to learn how to fix it. The same can be done if you bring the networking devices closer.
A lot of distance between them can make it difficult for their signals to transmit signals throughout the house. Taking this into account, do as necessary. However, at the same damn time, make sure that the distance is not too less as it will force the signals to clash and if that happens, then you can say goodbye to troubleshoot the Netgear extender not joining the internet issue, at least not in this lifetime. You might want to try it in another.

Final Words

Fixing the Netgear extender not joining the internet issue is not that big of a deal. You can easily troubleshoot it if you are careful while going through the troubleshooting solutions mentioned above. By any chance, if you are still experiencing the same issue, then take our advice, and reset your networking device. It is not everybody’s cup of tea to reset the Netgear extender. Perhaps, it is not yours but it is what we are assuming.

In this situation, reading what is given in the user manual is highly important. Starting from the resetting process to setting up the networking device from scratch, you will find every bit of detail about your range extender there. See for yourself.